Pressure Transducer

 

• 0 - 15 PSI pressure input
• 4-20mA output
• High accuracy and repeatability
• Welded 316 SS construction
• Computer-tested and calibrated
• Unique cable seal system
• Fully temperature compensated

 

Description

The Model 456-15 Pressure Transducer is designed specifically to meet the rigorous environments encountered in many level measurement applications. This transducer provides repeatable, precise depth measurements under the most adverse conditions.

 

It has been designed for installation in Class 1, Division 1, Groups A,B,C and D; Class II, Division 1, Groups E,F and G; Class III, Division 1 hazardous locations, when connected to the appropriate Stahl apparatus.

 

The Model 456-15 features high performance internal signal conditioning. An isolated diaphragm sensor has been incorporated for use with hostile fluids and gases. This sensor uses a silicon pressure cell that is fitted into a stainless steel housing with an integral, compliant stainless steel barrier diaphragm. The sensor assembly is housed in a rugged, compact 316 SS case, which provides for a variety of pressure inputs as well as electrical output connections.

 

Specifications

Model	456-15
Pressure range	0 - 15 PSI other pressure ranges available upon request
Static accuracy	± 1% FSO BFSL Static accuracy includes the combined errors due to nonlinearity, hysteresis & nonrepeatability on a “full scale output” (FSO) “best fit straight line” (BFSL) basis, at 25o C or 77o F, per ISA S51.1.
Thermal error	0.1% FSO/oC worst case Thermal error is the maximum allowable deviation from BFSL due to a change in temperature, per ISA S51.1.
Proof pressure	1.5 x rated pressure
Burst pressure	2.0 x rated pressure
Resolution	Infinitesimal
Excitation	9 to 30VDC
Input current	20mA max.
Output current	4 - 20mA
Zero offset	4 - 20mA ± 0.12mA max.
Output impedance	< 10 ohms
Insulation resistance	100 megohms at 50VDC
Circuit protection	Polarity, surge/shorted output
Compensated temp	+32° to +122° F
Operating temp range	+14° to +140° F
Enclosure material	316 stainless steel
Mounting	Suspended by cable
Weight	7 oz.
Cable	30 feet; approx. 1.2 lbs. Polyurethane jacketed shielded cable with polyethylene vent tube and Kevlar tension members. 200 lbs. pull strength. 22 AWG conductors. Approx. weight: 0.04 lb/ft. Tefzel jacket, optional.
Agency Approvals	Approvals to FM, CSA and UL are standard for Class I, Div 1, Groups A, B, C and D, and Class II, Div 1, Groups E, F and G, and Class III, Div 1 hazardous locations (install to national & local codes w/ approved barrier).

Downloads

Document	File Type	File Size	Download
Model 456-15 Datasheet	PDF	760 KB

© 2024 Relay Specialties, Inc.
17 Raritan Road, Oakland, NJ 07436 | 800-526-5376
Created By: G.Dezines