Ratings / Characteristics

Ratings

Switching voltage 100 VDC max.
Switching current 0.25 ADC (max.)
Contact capacity 10 WDC (max.)

Note: The values apply under the following test conditions:
Ambient temperature: 20±2ºC
Ambient humidity: 65±5%
Operating frequency: 30 operations/min



Characteristics

Permissible operating speed 0.1mm to 1 m/s max. (pin plunger models)
Permissible operating frequency Mechanical 200 operations/min max.
Electrical 200 operations/min max.
Insulation resistance 100MΩ min. (at 500 VDC with insulation tester)
Contact resistance (initial value) 150 mΩ max.
Dielectric strength *1 200 VDC for 1 min between terminals of same polarity
500 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between each terminal and non-current-carrying metal part
Vibration resistance *2 Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance Destruction  500 m/s2 {approx. 50G} max.
Malfunction 2: 200 m/s2 {approx. 20G} max.
Durability *3 Mechanical 10,000,000 operations min. (200 operations/min)
Electrical 3,000,000 operations min. (200 operations/min)
Degree of protection IEC IP40
Degree of protection against electric shock Class I
Proof tracking index (PTI) 175
Ambient operating temperature -10ºC to +60ºC (at ambient humidity of 60% max.)
(with no icing or condensation)
Ambient operating humidity 80% max. (for +5ºC to +35ºC)
Weight Approx. 7 g (pin plunger models)

Note: The data given avove are initial values.
* 1 The values for dielectric strength shown are for models with a Separator (refer to "Basic Switch Common Accessories").
* 2 For the pin plunger models, the above values apply for use at the free position and total travel position. For the lever models, they apply at the total travel position. Close or open circuit of the contact is 1ms max.
* 3 For testing conditions, consult your OMRON sales representative.

Downloads

Document File Type File Size Download
D2RV Series Datasheet PDF 701 KB