Ratings / Characteristics

Ratings

Item Rated voltage Resistive Load
30 VDC 0.1 A

Note: The ratings values apply under the following test conditions:
Ambient temperature: 20±2ºC
Ambient humidity: 65±5%
Operating frequency: 30 operations/min.



Characteristics

Permissible operating speed 0.1 mm to 1m/s(pin plunger models)
Permissible operating frequency Mechanical 400 operations/min max.
Electrical 30 operations/min max.
Insulation resistance 100 MΩ min.(at 500 VDC)
Contact resistance (initial value) *1 2100 mΩ max. including connector and 50-mm AWG28 lead-wire resistance
Dielectric strength 1,000 VAC at 50/60 Hz for 1 min between terminals of the same polarity
1,500 VAC at 50/60 Hz for 1 min between charged metal part and ground
1,500 VAC at 50/60 Hz for 1 min between non-charged metal part and each terminal
Vibration resistance Malfunction 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance Durability 1,000 m/s2 {approx. 100G} max.
Malfunction*2 300 m/s2 {approx. 30G} max.
Durability *3 Mechanical 500,000 operations min.(60 operations/min)
Electrical 200,000 operations min.(30 operations/min)
Degree of protection IEC IP40
Degree of protection against electric shock Class I
Proof tracking index (PTI) 175
Ambient operating temperature -25ºC to +80ºC (at ambient humidity of 60% max.) 
(with no icing or condensation)
Ambient operating humidity 85% max. (for +5ºC to +35ºC)
Weight Approx. 2 g (pin plunger models)

Note: The data given above are initial values.
*1 Includes the resistance of the connector and lead wire (AWG #28, 50 mm length).
*2 The values are Free Position and Total Travel Position values for pin plunger, and Total Travel Position value for lever. Close or open circuit of the contact is 1 ms max.v *3 For testing conditions, consult your OMRON sales representative.

Downloads

Document File Type File Size Download
D3M Series Datasheet PDF 630 KB