Ratings / Characteristics

Ratings

Item Rated voltage Resistive Load
30 VDC 0.1 A

Note: The ratings values apply under the following test conditions:
Ambient temperature: 20±2ºC
Ambient humidity: 65±5%
Operating frequency: 30 operations/min.



Characteristics

Permissible operating speed (see note 2) 1 mm to 250 mm/s
Permissible operating frequency Mechanical: 240 operations/min max.
Electrical: 30 operations/min max.
Insulation resistance 100 MΩ min. (at 500 VDC)
Contact resistance (initial value) 100 mΩ max. (molded lead wire models: 140 mΩ max.)
Dielectric strength *1 600 VAC, 50/60 Hz for 1 min between terminals of the same polarity
1,000 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between each terminal and non-current-carrying metal parts
Vibration resistance *2 Malfunction 10 to 55 Hz, 1.5 mm double amplitude
Shock resistance Destruction 1,000 m/s2 {approx. 100G} max.
Malfunction *2 200 m/s2 {approx. 20G} max.
Durability *3 Mechanical 1,000,000 operations min.(60 operations/min)
Electrical 100,000 operations min.(30 operations/min)
Degree of protection IEC IP67 (excluding the terminals on terminal models)
Degree of protection against electric shock Class I
Proof tracking index (PTI) 175
Ambient operating temperature -40ºC to +85ºC (at ambient humidity of 60% max.)(with no icing or condensation)
Ambient operating humidity 35% to 98% (for +5ºC to +35ºC)
Weight Approx. 7 g (pin plunger models with molded lead wire models)

Note: The data given above are initial values.
* 1. The dielectric strength values shown apply for use with Separator (refer to page 4).
* 2. For the pin plunger models, the above values apply for use at the free position and total travel position. For the lever models, they apply at the total travel position. Close or open circuit of the contact is 1ms max.
* 3. For testing conditions, consult your OMRON sales representative.

Downloads

Document File Type File Size Download
D2JW Series Datasheet PDF 962 KB