Ratings / Characteristics

Ratings

Item Rated voltage Resistive Load
125 VAC 0.1 A
12 VDC
24 VDC
42 VDC		 2 A
1 A
0.5 A

Note: The ratings values apply under the following test conditions:
Ambient temperature: 20±2ºC
Ambient humidity: 65±5%
Operating frequency: 30 operations/min.



Characteristics

Permissible operating speed 1 mm to 500 mm/s (for pin plunger models)
Permissible operating frequency 30 operations/min
Insulation resistance 100 MΩ min. (at 500 VDC with insulation tester)
Contact resistance (initial value) Terminals 100 mΩ max.
Molded lead wire
models		 150 mΩ max.
Dielectric strength Between terminals of the same
polarity		 600 VAC 50/60 Hz 1min
Between current-carrying metal
parts and ground		 1,500 VAC 50/60 Hz for 1 min
Between each terminals and
non-current-carrying metal parts		 1,500 VAC 50/60 Hz for 1 min
Vibration resistance *1 Malfunction 10 to 55 Hz, 1.5 mm double amplitude
Shock resistance Durability 1,000 m/s2 {approx. 100G} max.
Malfunction*1 300 m/s2 {approx. 30G} max.
Durability Mechanical 1,000,000 operations min. (30 operations/min)
Electrical 100,000 operations min. (20 operations/min)
Degree of protection Terminals IEC IP67 (excluding the terminals on terminal models)
molded lead wire models IEC IP67
Ambient operating temperature –40 to +85 °C(at ambient humidity of 60% max.)
(with no icing or condensation)
Ambient operating humidity 95% max. (for +5 to +35°C)
Weight Approx. 0.7 g (for pin plunger models with terminals)

Note: The data given above are initial values.
*1. For the pin plunger models, the above values apply for use at the free position, operating position, and total travel position. For the lever models, they apply at the total travel position. Close or open circuit of the contact is 1ms max.
*2. For testing conditions, consult your OMRON sales representative.

Downloads

Document File Type File Size Download
D2HW Series Datasheet PDF 2.6 MB