Description

 

The 2310 is an INITIATE switch controlled single-shot timer controlling a SPDT set of relay contacts. The 2310 is available in a range of both AC and DC models. With operating voltage applied, the timer is in a stand-by mode. Momentary closure of the INITIATE switch causes the output contacts to energize for a preset timing period, and then de-energize. Re-closure of the INITIATE switch during a timing cycle will not effect the timing period.

 

Type	Function	Industries
Timer	Single Shot	Transportation

Specifications

Timing Mode	SINGLE-SHOT Timing - Initiate switch controlled
Operating Voltage	12, 24V DC or 24, 115V AC.
Adjustable Timing Ranges	0.1 - 30.0 seconds, 2 - 1000 seconds, 30 - 8000 seconds.
Purchase Tolerance	Low time 0%, -50%, High time -0%, 30%. Ex : Timing range -3, (2 - 1000 seconds), can range from 1 to 1300 seconds, with 2 - 1000 seconds as a guaranteed minimum range.
Repeatability of Timing	±2%
Timing Temperature Coefficient	±0.25% deg.C
Output Relay	SPDT contacts - 12A at 125V AC UL E88991 & CSA LR90143, 10A 125V AC TUV R9452021.
Terminations	Octal plug-in type.
Dielectric Strength	1,200V rms between open contact sets, 1,500V rms between contacts and operating voltage terminals.
Transient Protection	Protected by silicon transient suppressors responding to transients within 1x10-12 seconds to a peak pulse power dissipation of 1500 watts.
Operating Temperature	0 deg.C to 70 deg.C

Documents and Downloads

Document	File Type	File Size	Download
Model No. 2310 Datesheet	PDF	237 KB

© 2024 Relay Specialties, Inc.
17 Raritan Road, Oakland, NJ 07436 | 800-526-5376
Created By: G.Dezines