Description

 

The 2410 is a delay-on-make timer controlling a DPDT set of relay contacts. The 2410 is available in a range of both AC and DC models. When operating voltage is applied the timing period begins. At the end of the timing period the output contacts transfer and remain transferred for a long as the operating voltage is applied. To recycle the timer the operating voltage must be removed and re-applied.

 

Type	Function	Industries
Timer	Delay On Make	Transportation, Elevator-Escalator, Lighting

Specifications

Adjustable Timing Ranges	0.1 - 30.0 seconds, 2 - 1000 seconds, 30 - 8000 seconds.
Purchase Tolerance	Low time 0%, -50%, High time -0%, 30%. Ex: Timing range -3, (2 - 1000 seconds), can range from 1 to 1300 seconds, with 2 - 1000 seconds as a guaranteed minimum range.
Repeatability Of Timing Periods	±2%
Timing Temperature Coefficient	±0.25%deg.C
Timing Mode	Delay-On-Make
Operating Voltage	12, 24V DC or 24, 115V AC.
Recycle Time	Operating voltage must be removed for a minimum of 100 milliseconds to assure that the timing circuits are reset.
Output Relay	DPDT contacts - 12A at 125V AC UL E88991 & CSA LR90143, 10A 125V AC TUV R9452021.
Terminations	Octal plug-in type
Dielectric Strength	1,200V rms between open contact sets, 1,500V rms between contacts and operating voltage terminals.
Transient Protection	Protected by silicon transient suppressors responding to transients within 1x10-12 seconds to a peak pulse power dissipation of 1500 watts.
Operating Temperature	0 deg.C to 70 deg.C

Documents and Downloads

Document	File Type	File Size	Download
Model No. 2410 Datesheet	PDF	265 KB

© 2024 Relay Specialties, Inc.
17 Raritan Road, Oakland, NJ 07436 | 800-526-5376
Created By: G.Dezines