Bushing Seals pack all the sealing power of a boot, but focus on the mounting hole as opposed to the switch itself.

Installed before a switch locking nut, the bushing seal fits snugly against either the front or back side of the mounting panel, sealing the mounting hole from any possible intrusion. Bushing Seals are small, inconspicuous and perfect for ready-sealed toggle, push button and rotary switches.

Material Specifications.

For APM Hexseal® Standard Bushing Seals

• Elastomer: Silicone conforms to A-A-59588, Class 3A, GR50 , Gray
• Mounting Nut: 18/8 Stainless Steel
• Temperature Range: -103° F to +400° F ( -75° C to +204° C)
• Resistant to: Splash, salt spray, sunlight, ozone, weather, fungus, dust, and most acids and lubricating oils.
• Shelf Life: Excess of 25 years.

Part Numbers

2600 Series

APM Hexseal Part #	Bushing Size (A)		Height (B)		Seal Diameter (C)		Outer Diameter (D)		Seal Style
60064 (M5423/17-01)	0.469"	11.91mm	0.120"	3.03mm	Top: 0.610" Bottom: 0.610"	Top: 15.49 mm Bottom: 15.49 mm	0.662"	16.81mm	Double-Side Seal
60065	0.375"	9.53mm	0.120"	3.03mm	Top: 0.500" Bottom: 0.522"	Top: 12.70 mm Bottom: 13.26 mm	0.572"	14.53mm	Double-Side Seal
60225 (M5423/16-01)	0.469"	11.91mm	0.120"	3.03mm	0.610"	15.49mm	0.662"	16.81mm	Single-Side Seal

Documents and Downloads

Document	File Type	File Size	Download
Short Catalog Datasheet	PDF	1.3 MB

© 2024 Relay Specialties, Inc.
17 Raritan Road, Oakland, NJ 07436 | 800-526-5376
Created By: G.Dezines