West New York, NJ: Amperite Co., a leading manufacturer of solid state and thermal time delay relays,flashers, timing and industrial controls, announces the newest addition to their Delay-on-Make Timers line ... the ST1 D Series in a hockey puck style package.
The ST1 D Series Delay-on-Make Timer features Solid State CMOS digital circuitry, 1 form A adjustable switching device, by means of a 10 position DIP switch encoded in binary format. Although 3 ampere continuous load current is standard, a 10 ampere load current rating is also available.
The ST1 D Series is available in two timing ranges, .2 to 102.3 seconds in increments of 0.1 second, and 1 to 1023 seconds in 1 second increments, both with timing accuracy of +/- 5% plus 112 increment, and a 2% timing repeatability. Custom timing is also available.
The ST1D Series Delay-on-Make Timer is available in 12 24 28 100 and 120V Ac or DC vaoltage. Custom Voltages are also available.
- 100% Solid State Circuitry - no moving parts
- CMOS digital circuitry
- Adjustable delay by means of a 10 position DIP switch
- 3 ampere continuous load current (10 amperes available; consult factory)
TIMING MODE:
Delay on operate begins upon application of input power. The load is energized at the end of the delay period and remains so until input power is removed.
CONTACT INFORMATION:
Solid state switching device 1 form A; normally open series connection. Continuous current rating 3 amperes. Maximum inrush 20 amperes. Voltage drop 2.5 volts RMS or less @ 3 amperes. (For 10 ampere load current rating consult factory). NOTE: Maximum current rating for 110V DC is 2 amperes (heat sink required).
TIMING SPECIFICATIONS:
Two timing ranges available: .2 to 102.3 seconds in increments of 0.1 second and 1 to 1023 seconds in increments of 1 second. Custom timing available. Timing adjustment by means of a 10 position DIP switch encoded in binary format (1, 2, 4, 8, etc.) Timing accuracy: +/- 5% plus 1/2 increment Timing repeatability: 2% Timing cycle interrupt transfer: none
